The Spy High mounting system is a new and unique way to place and manipulate your trapping cameras in a tree at an incredible height and from the ground - no ladders or climbing required! This prevents the risk of falls and greatly reduces the possibility of someone viewing, vandalizing or stealing your monitoring equipment. Each pole is extendable from 61cm to 122cm and can be connected together allowing the user to mount cameras up to a height of 4.90cm (depending on their height and wingspan) without using ladders or having to climb. A bayonet system on the end of the poles allows for a solid connection that prevents twisting or loosening. The length of the poles is easily adjusted in 15cm increments, locking securely in each position. The tree couplings are clicked into the poles and can thus be screwed into the desired camera position with a few turns of the pole. These pieces are made of super resistant nylon and are practically impossible to destroy, crush or deform. The camera mounting bracket simply screws onto the back or bottom of your trap camera (depending on the camera model, it will have the anchor on the base or on the back, in this second case you must use the universal adapter also included in the pack). Once assembled, it is inserted with a click into the end of the pole. The mounts are equipped with a rubber ball that allows the mount to rotate for easy adjustment of the camera. These supports are also made of a super resistant nylon material. Also included is our laser support (with its corresponding laser pointer). The laser mount fits around the end of our pole and holds the laser pointer. Using it as a guide we can direct the lens of our camera until it is in the desired position for taking photos and videos. The green light point of the laser will be visible on the ground, indicating the exact point at which the camera is focused and allowing us to make the desired adjustments by moving the camera support with the pole. Be sure to turn on the pointer (with a simple twist) before lifting it with the pole to adjust the camera to the tree. With a single click, you can also change and install the included saw blade on the pole. With it you can prune and trim branches or other obstacles that could cover the camera lens, thus avoiding unwanted images. This accessory is easily disassembled by pushing the fiberglass reinforced nylon lever but we must always be careful when placing and removing the saw blade to avoid accidents. The pack also includes a drill adapter that will allow you, if you wish, to screw the couplings to the tree even more quickly.
